Numbering, creasing, perforating and cutting machine CONTAGOR 470

With machine CONTAGOR 470 you can push into various motives with the aid of polymeric cliche at measurement 35 x 45 mm. Is possible to operate machine how stand or you can order mobile stand.

You can also order air pump for side scatter of paper pile. It is suitable at producing paperboards and papers with higher weight. Machine also can produce carbonless series (to five sheets), namely numbering and perforating at one machine shoot. Standard equipment including full and rate counter, detection of errors stage guarantee steady working results without mistakes in number line. You can put to machine 20 counters:

• in parallel with bracket shaft (upright)
• plumb (horizontally)

Digital indicator informs you about stage of offer producing. Machine program can adjust number changes continuously consecutive or repeating the same number in 2 – 9 cycles. Available 2 types of counter with 7 numbers and with letter altitude 3,5 mm or 4,76 mm, eventually by clients exigency. You can also choose upward or downward numbering.

• max. size 465 x 420 mm (width x length)
• min. size115 x 185 mm
• paper weight 45 g/m² till 250 g/m² including carbonless series to five sheets
• paper feeding by three feeding wheels with ability side scatter (for order)
• speed till 5500 sheets/h, 9 stages in speed adjustable on control panel
• pile in feeder till 60 mm
• 2 fixative round for counters are standard component of supplies (it is possible to expand it to 4). On each round you can give 8 numerators. Recommended max. numerator count is 20.
• You can installed 6 holders for perforating, creasing and cutting wheels, 2 holders are including of supplies
• available 2 systems of colour application:
• a)micropores rollers with colour, which are available in these colours: black, red, green, blue and violet
• b)application by offset system – consist of 2 rollers and you can use usual colour for offset print
• connecting on 230 V/50 Hz, about 250 W
• measurements 1000 x 700 x 405 mm (altitude, width, depth including stand)
• weight about 80 kg
• certificate by standard EU - CE